Sennheiser MKE 600

Sennheiser MKE 600 on ideaali suuntaava kameramikrofoni mikä on valmistettu Saksassa. Edullisesta hinnasta huolimatta mikrofoni on hyvin laadukas ja toimii Phantom jänmnitteellä tai AA-paristolla. Low Cut kytkin suodattaa tuulen kohinaa. Tuulimuhvi ja kannatin mikrofonitelineeseen mukana.

Mitat:
Paksuus: 20mm
Pituus: 256mm
Paino: 128g

MKE 600 is ideal video camera/camcorder microphone able to handle even demanding filmic challenges. Due to its high directivity, the MKE 600 picks up sounds coming from the direction in which the camera is pointing and effectively attenuates noise coming from the sides and rear. The switchable “Low Cut” filter additionally minimizes wind noise.
Because some video cameras/camcorders do not provide phantom power, the MKE 600 can also be battery powered. A battery on/off switch prevents the battery from discharging prematurely; “Low Batt” is displayed.

Features:
– Pronounced directivity
– Maximal rejection of side noise
– Switchable “Low Cut” filter minimizes wind noise
– Phantom or battery powering
– Battery switch with “Low Batt” indicator
– Rugged all-metal housing
– Very good suppression of structure-borne noise
– Supplied with foam windshield and shock mount

Spesifications:
Polar Pattern Super-cardioid/Lobar
Frequency Response 40 Hz to 20 kHz
Sensitivity -21 mV/Pa with 48V powering
-19 mV/Pa with battery powering
Maximum Sound Pressure Level (SPL) 132 dB with 48V powering
126 dB with battery powering
EIN 15 dB(A) with 48V powering
16 dB(A) with battery powering
Low Frequency Roll-Off Yes
Power Requirements 48V +/-4V (P48, IEC 61938) via XLR-3 or AA size battery/rechargeable battery (1.5/1.2V)
Current Consumption 4.4 mA with P48 powering
Battery Operation Times Approximately 150 hours
“Low Batt” Indicator: <1.05V with approximately 8 hours of remaining operating time after initial display
Output Connectors 1 x XLR
Operating Temperature -10°C to +60°C
Dimensions: 20 mm
Length: 256 mm
Weight 128 g without battery