DJI RONIN-MX

JI RONIN-MX on uusi kolmiakselinen gimbal, mikä on yhteensopiva myös DJI M600 -kopterin kanssa.

Tutustu käyttöohjeeseen tästä:
https://dl.djicdn.com/downloads/ronin-mx/en/Ronin-MX_User_Manual%20v1.0_en_160603.pdf

Tekniset tiedot:

Performance
Load Weight (Reference Value) 10 lb / 4.5 kg
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed Pan Axis: 200°/s
Tilt Axis: 100°/s
Roll Axis: 30°/s
Mechanical Endpoint Range Pan Axis Control: 360°
Tilt Axis Control: +270° to -150°
Roll Axis Control: ± 110°
Controlled Rotation Range Pan Axis Control: 360°
Tilt Axis Control: +45° to -135°
Roll Axis Control: ± 25°

Electrical and Mechanical
Sensors Temperature sensor
Processing 32-Bit DSP Processor
Expandability D-Bus receiver supported
Working Current Static Current: 300 mA (at 16 V)
Dynamic Current: 600 mA (at 16 V)
Locked Motor Current: Up to 10 A (at 16 V)

Receiver
Frequency 2.4 GHz

Transmitter
Frequency 2.4 GHz

Connectivity
Wireless Bluetooth 4.0
Wired 1 x USB 2.0

GCU
Power Requirements 4S Ronin-M battery

System Requirements
Assistant Software Windows XP or above
Mac OS X 10.9 or above
iOS 7.1 or above
Android 4.3 or above

General
Control Modes Underslung Mode
Upright Mode
Briefcase Mode
Aerial Mode
Jib or Wirecam Mode
Accessory Power Ports 2 x 12 V Regulated P-Tap
1 x USB 500 mW
1 x DJI Lightbridge
Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 4.7″ / 120 mm
Maximum height measured from top of camera base plate: 7.7″ / 195 mm
Maximum width: 6.3″ / 160 mm
Operating Temperature 5 to 120°F / -15 to 50°C
Dimensions (W x D x H) Excluding Handle Bar: 11 x 14.6 x 13.4″ / 280 x 370 x 340 mm
Including Handle Bar: 22 x 14.6 x 17.3″ / 560 x 370 x 440 mm
Weight Including Handle Bar: 6.11 lb / 2.77 kg
Including Vibration Damper: 4.74 lb / 2.15 kg