Blackmagicdesign Blackmagic Micro Studio Camera 4K
Pieni 4K studiokamera runko Micro Four Thirds bajonetilla
Tuotteen valmistus lopetettu
Blackmagic Micro Studio Camera 4K nyt suoraan varastosta meiltä! Kysy myös tarjousta varusteilla! Soveltuu esim. livetuotantoon tai tilan 4K-tarkkailukameraksi tai kuvaukraanaan!
Linssibajonetti: Active Micro Four Thirds Lens Mount
Maksimiresoluutio: to 3840×2160 / max 30 fps
10-Bit 4:2:2 6G-SDI Video I/O
Ultra kompakti muotoilu
SDI Remote Control Protocol kameran ohjaus Atem miksereistä!
PTZ Serial Output & B4 Data Link
Built-In Talkback
HDMI Monitor Output, 3.5mm Audio In
Built-In Color Corrector
Futaba -liitin maxkameran parametrien säätämiseen
Canon LP-E6 akkupaikka
Resoluutiot ja kuvanopeudet:
3840 x 2160p 23.98/24/25/29.97/30
1920 x 1080p 23.98/24/25/29.97/30/50/59.94/60
1920 x 1080i 50/59.94
Kuvasensorin koko: 13.056 x 7.344 mm
Liitännät:
SDI Video Output 1 x 6G-SDI (DIN 1.0/2.3 miniSDI connector), 10-bit 4:2:2
SDI Video Input 1 x 6G-SDI (DIN 1.0/2.3 miniSDIconnector), 10-bit 4:2:2
BNC-SDI sovitinkaapli meiltä lisävarusteena
SDI Audio Output 2-channel embedded audio support in SDI stream
Analog Audio Input 1 x 3.5 mm stereo mini jack (mic or line level)
Analog Audio Output 1 x 3.5mm stereo connector (for stereo headphones, compatible with iPhone headsets for talkback)
Expansion Port 1 x DB-HD15 serial connector supports:
LANC input
1 x S.Bus channel input
PTZ output
Genlock input
B4 lens control output
Remote Control Over SDI via ATEM Switcher CCU protocols or via expansion port using LANC or S.Bus.
Computer Interface USB 2.0 Mini-B port (for software updates and configuration)
Built-In Microphone Integrated stereo microphone
Mounting 1 x 1/4″-20 thread (top)
3 x 1/4″-20 thread (bottom)
Power 12 to 20 VDC
Battery Type Canon LP-E6
Battery Life Approx. 1 hour 10 minutes
Dimensions 8.26 x 6.96 x 6.53 cm
Weight 303.34 g
Mukana tulevat tarvikkeet:
Kamera, 12 V -AC-adapteri, runkotulppa
Uudet lisäominaisuudet päivityksen jälkeen!
• Added 720p50, 720p59.94 and 720p60 format support.
• Improved sensor exposure sensitivity by 2 stops.
• Added new gain setting range which now goes from -12dB to +12dB.
• Added RAW SDI output feature. Refer to the user manual for information about capturing and unpacking RAW SDI video.
• Added support for PTZ communication on Expansion port via VISCA. Refer to the user manual for protocol details.
• Added support for PTZ commands in the Blackmagic SDI Control Protocol.
• Added preview tally support for the front tally light.
• Added tally indication on the HDMI display overlay.
• Added indication to the user that camera is genlocked on the HDMI display overlay.
• Added feature to pass through remote record commands as SDI and HDMI record triggers for external recorders.
• Added option to change camera frame rate via S.Bus.
• Added option to toggle auto focus via S.Bus.
• Added option to toggle record via S.Bus for external recorders.
Blackmagic Design valtuutettuna ammattilaitemyyjänä annamme asiakkaillemme myös tarvittaavaa tuotetukea.
Tutustu myös
Kamerarigit
Kamerat ja varusteet
Kamerat ja varusteet
Kamerat ja varusteet
Kamerat ja varusteet
kamera-akut
Kamerat ja varusteet
Kamerat ja varusteet
kamera-akut
Blackmagic Design
Kamerajalustat ja varusteet